Trocador is a 12V electric pump engineered to move used oil out of a dipstick tube and into a sealed 6-liter tank. Every dimension, tolerance and part number is listed below — no guesswork.
REF A1 — TANK
REF A3 — INPUT
REF A6 — PIPE SET
Full dimensional and performance data for the Trocador Electric Extractor.
| Ref | Component | Value |
|---|---|---|
| A1 | Tank Capacity | 6.0 L / 1.6 US gal |
| A2 | Transfer Rate | 1.5 L/min, continuous |
| A3 | Power Input | 12V DC — lighter plug or battery clamps |
| A4 | Housing Footprint | 41 × 21 cm (16" × 8.3") |
| A5 | Unit Weight | 2.2 kg / 4.8 lbs |
| A6 | Pipe Set | 5 / 6 / 8 mm + 1 extension pipe |
6-Liter tank · 12V powered · 1.5L/min transfer rate
Holds a full oil change in one pull — no swapping containers mid-job, and it seals shut for transport once the job's done.
Wired for both a cigarette lighter plug and battery alligator clamps — use whichever power source is closer to the job.
5mm, 6mm and 8mm pipes plus an extension pipe reach dipstick tubes across cars, motorcycles, boats and small engines.
A steady motorized draw instead of manual hand-pumping, so most passenger-car oil changes finish in under 5 minutes.
"Built like a tank. Plugged it into my truck's cigarette lighter and it pulled a full oil change with zero mess."
"I run a small marina and use this on outboard motors weekly. The three pipe sizes reach every dipstick tube I've tried."
"Clipped it to the battery and pulled transmission fluid in about ten minutes. Nothing leaked or cracked."
30-DAY
GUARANTEE
Money Back